J'ai un ordinateur Acer Aspire M5640/M3640, doté d'un processeur Intel Core 2 Q8200 (Quad-core) exécutant Ubuntu 12.04.
Il semble maintenant ne reconnaître qu'un seul cœur de processeur. lscpu
sorties:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Stepping: 10
CPU MHz: 2333.403
BogoMIPS: 4666.80
L1d cache: 32K
L1i cache: 32K
L2 cache: 2048K
NUMA node0 CPU(s): 0
Je me serais attendu à avoir Core(s) per socket
et CPU(s)
à avoir 4
répertorié comme valeur ici.
Une remarque importante est que je ne peux pas le démarrer régulièrement, mais que j’ai besoin du paramètre de démarrage du noyau nolapic
pour éviter un blocage brutal au démarrage.
En parlant de démarrage, la version du firmware est Version: R01-C2
Toute idée sur la capacité d'utiliser les quatre cœurs sera hautement appréciée.
dmesg
donne:
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: nVidia
[ 0.000000] MPTABLE: Product ID: MCP73
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Processor #2
[ 0.000000] Processor #3
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
et lshw -class cpu
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
serial: To Be Filled By O.E.M.
slot: SOCKET775 M/B
size: 2333MHz
capacity: 2333MHz
width: 64 bits
clock: 333MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc Arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm
configuration: cores=4 enabledcores=4 threads=4
*-processor UNCLAIMED
description: Co-processor
product: MCP73 Co-processor
vendor: NVIDIA Corporation
physical id: 3.3
bus info: pci@0000:00:03.3
version: a2
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: latency=0 maxlatency=1 mingnt=3
resources: memory:fce80000-fcefffff
et dmidecode
:
BIOS Information
Vendor: American Megatrends Inc.
Version: R01-C2
Release Date: 02/26/2009
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.15
System Information
Manufacturer: Acer
Product Name: Aspire M5640/M3640
Version: R01-C2
Serial Number: 91EER71ZCP93401DDA1800
UUID: Not Present
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Base Board Information
Manufacturer: Acer
Product Name: MCP73PV
Version: NVIDIA MCP73
Serial Number: 000000000
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Macaronis sacré. J'ai apparemment résolu le problème. En bref:
Installer OS select
en Other
(l'alternative étant Windows
)nolapic
.La lscpu
donne maintenant
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Stepping: 10
CPU MHz: 2336.000
BogoMIPS: 4666.66
L1d cache: 32K
L1i cache: 32K
L2 cache: 2048K
NUMA node0 CPU(s): 0-3
Je traverse validée avec top
tout en exécutant quelques processus de calcul intensif
3504 username 20 0 139m 47m 4308 R 100 1.2 4:57.11 R
3444 username 20 0 140m 47m 4316 R 99 1.2 5:24.08 R
Je peux enfin chauffer mon appartement
Merci beaucoup pour votre aide et vos pistes. Je ne suis pas sûr de ce que j'ai réellement fait, mais ça marche. Un merci spécial pour le BIOS. Je n'aurais jamais pensé à jouer avec les options ...