Serveur Web minimal utilisant Netcat
J'essaie de configurer un serveur Web minimal à l'aide de netcat (nc). Lorsque le navigateur appelle localhost: 1500, par exemple, il devrait afficher le résultat d'une fonction (date dans l'exemple ci-dessous, mais ce sera finalement un python ou c programme qui donne des données). Mon petit serveur Web netcat doit être une vraie boucle en bash, peut-être aussi simple que cela:
while true ; do echo -e "HTTP/1.1 200 OK\n\n $(date)" | nc -l -p 1500 ; done
Lorsque j'essaie, le navigateur affiche les données actuellement disponibles au moment du démarrage de nc. Je souhaite que le navigateur affiche les données au moment où le navigateur le demande. Comment puis-je atteindre cet objectif?
Essaye ça:
while true ; do nc -l -p 1500 -c 'echo -e "HTTP/1.1 200 OK\n\n $(date)"'; done
-cmets netcat exécuter la commande donnée dans un shell afin que vous puissiez utiliser echo. Si vous n'avez pas besoin d'écho, utilisez -e. Pour plus d'informations à ce sujet, essayez man nc. Notez que lorsque vous utilisez echo, votre programme (le remplacement date-) ne peut pas obtenir la demande du navigateur. Donc, vous voudrez probablement faire quelque chose comme ceci:
while true ; do nc -l -p 1500 -e /path/to/yourprogram ; done
Où yourprogram doit exécuter les tâches de protocole telles que la gestion de GET, l'envoi de HTTP 200, etc.
Donno comment ou pourquoi mais je parviens à trouver cela autour et cela fonctionne pour moi, j'ai eu le problème que je voulais renvoyer le résultat de l'exécution d'une bash
$ while true; do { echo -e 'HTTP/1.1 200 OK\r\n'; sh test; } | nc -l 8080; done
REMARQUE: Cette commande a été prise à partir de: http://www.razvantudorica.com/08/web-server-in-one- ligne-de-bash
cela exécute le test de script bash et renvoie le résultat à un client du navigateur se connectant au serveur exécutant cette commande sur le port 8080
Mon script fait ce guichet automatique
$ nano test
#!/bin/bash
echo "************PRINT SOME TEXT***************\n"
echo "Hello World!!!"
echo "\n"
echo "Resources:"
vmstat -S M
echo "\n"
echo "Addresses:"
echo "$(ifconfig)"
echo "\n"
echo "$(gpio readall)"
et mon navigateur Web montre
************PRINT SOME TEXT***************
Hello World!!!
Resources:
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 314 18 78 0 0 2 1 306 31 0 0 100 0
Addresses:
eth0 Link encap:Ethernet HWaddr b8:27:eb:86:e8:c5
inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27734 errors:0 dropped:0 overruns:0 frame:0
TX packets:26393 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1924720 (1.8 MiB) TX bytes:3841998 (3.6 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
GPIOs:
+----------+-Rev2-+------+--------+------+-------+
| wiringPi | GPIO | Phys | Name | Mode | Value |
+----------+------+------+--------+------+-------+
| 0 | 17 | 11 | GPIO 0 | IN | Low |
| 1 | 18 | 12 | GPIO 1 | IN | Low |
| 2 | 27 | 13 | GPIO 2 | IN | Low |
| 3 | 22 | 15 | GPIO 3 | IN | Low |
| 4 | 23 | 16 | GPIO 4 | IN | Low |
| 5 | 24 | 18 | GPIO 5 | IN | Low |
| 6 | 25 | 22 | GPIO 6 | IN | Low |
| 7 | 4 | 7 | GPIO 7 | IN | Low |
| 8 | 2 | 3 | SDA | IN | High |
| 9 | 3 | 5 | SCL | IN | High |
| 10 | 8 | 24 | CE0 | IN | Low |
| 11 | 7 | 26 | CE1 | IN | Low |
| 12 | 10 | 19 | MOSI | IN | Low |
| 13 | 9 | 21 | MISO | IN | Low |
| 14 | 11 | 23 | SCLK | IN | Low |
| 15 | 14 | 8 | TxD | ALT0 | High |
| 16 | 15 | 10 | RxD | ALT0 | High |
| 17 | 28 | 3 | GPIO 8 | ALT2 | Low |
| 18 | 29 | 4 | GPIO 9 | ALT2 | Low |
| 19 | 30 | 5 | GPIO10 | ALT2 | Low |
| 20 | 31 | 6 | GPIO11 | ALT2 | Low |
+----------+------+------+--------+------+-------+
simplement extraordinaire!
Ajoutez -q 1 à la ligne de commande netcat:
while true; do
echo -e "HTTP/1.1 200 OK\n\n $(date)" | nc -l -p 1500 -q 1
done
Le problème auquel vous faites face est que nc ne sait pas quand le client Web a terminé sa demande afin de pouvoir y répondre.
Une session Web devrait ressembler à ceci.
TCP session is established.
Browser Request Header: GET / HTTP/1.1
Browser Request Header: Host: www.google.com
Browser Request Header: \n #Note: Browser is telling Webserver that the request header is complete.
Server Response Header: HTTP/1.1 200 OK
Server Response Header: Content-Type: text/html
Server Response Header: Content-Length: 24
Server Response Header: \n #Note: Webserver is telling browser that response header is complete
Server Message Body: <html>sample html</html>
Server Message Body: \n #Note: Webserver is telling the browser that the requested resource is finished.
The server closes the TCP session.
Les lignes commençant par "\ n" sont simplement des lignes vides sans espace, et ne contiennent rien de plus qu'un caractère de nouvelle ligne.
J'ai mon bash httpd lancé par xinetd, tutoriel xinetd . Il enregistre également la date, l'heure, l'adresse IP du navigateur et la demande complète du navigateur dans un fichier journal et calcule la longueur du contenu pour la réponse de l'en-tête du serveur.
user@machine:/usr/local/bin# cat ./bash_httpd
#!/bin/bash
x=0;
Log=$( echo -n "["$(date "+%F %T %Z")"] $REMOTE_Host ")$(
while read I[$x] && [ ${#I[$x]} -gt 1 ];do
echo -n '"'${I[$x]} | sed -e's,.$,",'; let "x = $x + 1";
done ;
); echo $Log >> /var/log/bash_httpd
Message_Body=$(echo -en '<html>Sample html</html>')
echo -en "HTTP/1.0 200 OK\nContent-Type: text/html\nContent-Length: ${#Message_Body}\n\n$Message_Body"
Pour ajouter plus de fonctionnalités, vous pouvez les intégrer.
METHOD=$(echo ${I[0]} |cut -d" " -f1)
REQUEST=$(echo ${I[0]} |cut -d" " -f2)
HTTP_VERSION=$(echo ${I[0]} |cut -d" " -f3)
If METHOD = "GET" ]; then
case "$REQUEST" in
"/") Message_Body="HTML formatted home page stuff"
;;
/who) Message_Body="HTML formatted results of who"
;;
/ps) Message_Body="HTML formatted results of ps"
;;
*) Message_Body= "Error Page not found header and content"
;;
esac
fi
Bonne bashing!
J'avais le même besoin/problème, mais ici rien ne fonctionnait pour moi (ou je ne comprenais pas tout), c'est donc ma solution.
Je poste mon minimal_http_server.sh (je travaille avec mon/bin/bash (4.3.11) mais pas/bin/sh à cause de la redirection):
rm -f out
mkfifo out
trap "rm -f out" EXIT
while true
do
cat out | nc -l 1500 > >( # parse the netcat output, to build the answer redirected to the pipe "out".
export REQUEST=
while read -r line
do
line=$(echo "$line" | tr -d '\r\n')
if echo "$line" | grep -qE '^GET /' # if line starts with "GET /"
then
REQUEST=$(echo "$line" | cut -d ' ' -f2) # extract the request
Elif [ -z "$line" ] # empty line / end of request
then
# call a script here
# Note: REQUEST is exported, so the script can parse it (to answer 200/403/404 status code + content)
./a_script.sh > out
fi
done
)
done
Et mon a_script.sh (avec votre besoin):
#!/bin/bash
echo -e "HTTP/1.1 200 OK\r"
echo "Content-type: text/html"
echo
date
Une autre façon de faire ça
while true; do (echo -e 'HTTP/1.1 200 OK\r\n'; echo -e "\n\tMy website has date function" ; echo -e "\t$(date)\n") | nc -lp 8080; done
Testons-le avec 2 requêtes HTTP en utilisant curl
Dans cet exemple, 172.16.2.6 est l'adresse IP du serveur.
Côté serveur
admin@server:~$ while true; do (echo -e 'HTTP/1.1 200 OK\r\n'; echo -e "\n\tMy website has date function" ; echo -e "\t$(date)\n") | nc -lp 8080; done
GET / HTTP/1.1 Host: 172.16.2.6:8080 User-Agent: curl/7.48.0 Accept:
*/*
GET / HTTP/1.1 Host: 172.16.2.6:8080 User-Agent: curl/7.48.0 Accept:
*/*
Côté client
user@client:~$ curl 172.16.2.6:8080
My website has date function
Tue Jun 13 18:00:19 UTC 2017
user@client:~$ curl 172.16.2.6:8080
My website has date function
Tue Jun 13 18:00:24 UTC 2017
user@client:~$
Si vous souhaitez exécuter une autre commande, n'hésitez pas à remplacer $ (date).
Voici une beauté de n petit serveur web bash , je l’ai trouvé en ligne et en ai fourré une copie et l’a rafraîchi un peu - il utilise socat ou netcat je l’ai testé avec socat - il est autonome dans one-script et génère son propre fichier de configuration et son favicon.
Par défaut, il démarre en tant que navigateur de fichiers Web, mais est facilement configuré par le fichier de configuration pour n’importe quelle logique. Pour les fichiers, il diffuse des images et de la musique (mp3), des vidéos (mp4, avi, etc.) - J'ai testé la diffusion en continu de différents types de fichiers sur des périphériques Linux, Windows et Android, y compris une montre intelligente!
Je pense qu'il diffuse mieux que VLC. Je l’ai trouvé utile pour transférer des fichiers vers des clients distants n’ayant pas accès au-delà d’un navigateur Web, par exemple. Android smartwatch sans vous soucier de la connexion physique à un port USB.
Si vous voulez l'essayer, copiez-le et collez-le dans un fichier nommé bashttpd, puis démarrez-le sur l'hôte avec $> bashttpd -s.
Ensuite, vous pouvez accéder à n’importe quel autre ordinateur (en supposant que le pare-feu ne bloque pas les connexions TCP entrantes vers le port 8080 - le port par défaut, vous pouvez modifier le port comme vous le souhaitez à l’aide des variables globales en haut du script). http://bashttpd_server_ip:8080
#!/usr/bin/env bash
#############################################################################
###########################################################################
### bashttpd v 1.12
###
### Original author: Avleen Vig, 2012
### Reworked by: Josh Cartwright, 2012
### Modified by: A.M.Danischewski, 2015
### Issues: If you find any issues leave me a comment at
### http://scriptsandoneliners.blogspot.com/2015/04/bashttpd-self-contained-bash-webserver.html
###
### This is a simple Bash based webserver. By default it will browse files and allows for
### retrieving binary files.
###
### It has been tested successfully to view and stream files including images, mp3s,
### mp4s and downloading files of any type including binary and compressed files via
### any web browser.
###
### Successfully tested on various browsers on Windows, Linux and Android devices (including the
### Android Smartwatch ZGPAX S8).
###
### It handles favicon requests by hardcoded favicon image -- by default a marathon
### runner; change it to whatever you want! By base64 encoding your favorit favicon
### and changing the global variable below this header.
###
### Make sure if you have a firewall it allows connections to the port you plan to
### listen on (8080 by default).
###
### By default this program will allow for the browsing of files from the
### computer where it is run.
###
### Make sure you are allowed connections to the port you plan to listen on
### (8080 by default). Then just drop it on a Host machine (that has bash)
### and start it up like this:
###
### $192.168.1.101> bashttpd -s
###
### On the remote machine you should be able to browse and download files from the Host
### server via any web browser by visiting:
###
### http://192.168.1.101:8080
###
#### This program requires (to work to full capacity) by default:
### socat or netcat (w/ '-e' option - on Ubuntu netcat-traditional)
### tree - useful for pretty directory listings
### If you are using socat, you can type: bashttpd -s
###
### to start listening on the LISTEN_PORT (default is 8080), you can change
### the port below.
### E.g. nc -lp 8080 -e ./bashttpd ## <-- If your nc has the -e option.
### E.g. nc.traditional -lp 8080 -e ./bashttpd
### E.g. bashttpd -s -or- socat TCP4-LISTEN:8080,fork EXEC:bashttpd
###
### Copyright (C) 2012, Avleen Vig <[email protected]>
###
### Permission is hereby granted, free of charge, to any person obtaining a copy of
### this software and associated documentation files (the "Software"), to deal in
### the Software without restriction, including without limitation the rights to
### use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
### the Software, and to permit persons to whom the Software is furnished to do so,
### subject to the following conditions:
###
### The above copyright notice and this permission notice shall be included in all
### copies or substantial portions of the Software.
###
### THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
### IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
### FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
### COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
### IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
### CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
###
###########################################################################
#############################################################################
### CHANGE THIS TO WHERE YOU WANT THE CONFIGURATION FILE TO RESIDE
declare -r BASHTTPD_CONF="/tmp/bashttpd.conf"
### CHANGE THIS IF YOU WOULD LIKE TO LISTEN ON A DIFFERENT PORT
declare -i LISTEN_PORT=8080
## If you are on AIX, IRIX, Solaris, or a hardened system redirecting
## to /dev/random will probably break, you can change it to /dev/null.
declare -a DUMP_DEV="/dev/random"
## Just base64 encode your favorite favicon and change this to whatever you want.
declare -r FAVICON="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"
declare -i DEBUG=1
declare -i VERBOSE=0
declare -a REQUEST_HEADERS
declare REQUEST_URI=""
declare -a HTTP_RESPONSE=(
[200]="OK"
[400]="Bad Request"
[403]="Forbidden"
[404]="Not Found"
[405]="Method Not Allowed"
[500]="Internal Server Error")
declare DATE=$(date +"%a, %d %b %Y %H:%M:%S %Z")
declare -a RESPONSE_HEADERS=(
"Date: $DATE"
"Expires: $DATE"
"Server: Slash Bin Slash Bash"
)
function warn() { ((${VERBOSE})) && echo "WARNING: $@" >&2; }
function chk_conf_file() {
[ -r "${BASHTTPD_CONF}" ] || {
cat >"${BASHTTPD_CONF}" <<'EOF'
#
# bashttpd.conf - configuration for bashttpd
#
# The behavior of bashttpd is dictated by the evaluation
# of rules specified in this configuration file. Each rule
# is evaluated until one is matched. If no rule is matched,
# bashttpd will serve a 500 Internal Server Error.
#
# The format of the rules are:
# on_uri_match REGEX command [args]
# unconditionally command [args]
#
# on_uri_match:
# On an incoming request, the URI is checked against the specified
# (bash-supported extended) regular expression, and if encounters a match the
# specified command is executed with the specified arguments.
#
# For additional flexibility, on_uri_match will also pass the results of the
# regular expression match, ${BASH_REMATCH[@]} as additional arguments to the
# command.
#
# unconditionally:
# Always serve via the specified command. Useful for catchall rules.
#
# The following commands are available for use:
#
# serve_file FILE
# Statically serves a single file.
#
# serve_dir_with_tree DIRECTORY
# Statically serves the specified directory using 'tree'. It must be
# installed and in the PATH.
#
# serve_dir_with_ls DIRECTORY
# Statically serves the specified directory using 'ls -al'.
#
# serve_dir DIRECTORY
# Statically serves a single directory listing. Will use 'tree' if it is
# installed and in the PATH, otherwise, 'ls -al'
#
# serve_dir_or_file_from DIRECTORY
# Serves either a directory listing (using serve_dir) or a file (using
# serve_file). Constructs local path by appending the specified root
# directory, and the URI portion of the client request.
#
# serve_static_string STRING
# Serves the specified static string with Content-Type text/plain.
#
# Examples of rules:
#
# on_uri_match '^/issue$' serve_file "/etc/issue"
#
# When a client's requested URI matches the string '/issue', serve them the
# contents of /etc/issue
#
# on_uri_match 'root' serve_dir /
#
# When a client's requested URI has the Word 'root' in it, serve up
# a directory listing of /
#
# DOCROOT=/var/www/html
# on_uri_match '/(.*)' serve_dir_or_file_from "$DOCROOT"
# When any URI request is made, attempt to serve a directory listing
# or file content based on the request URI, by mapping URI's to local
# paths relative to the specified "$DOCROOT"
#
#unconditionally serve_static_string 'Hello, world! You can configure bashttpd by modifying bashttpd.conf.'
DOCROOT=/
on_uri_match '/(.*)' serve_dir_or_file_from
# More about commands:
#
# It is possible to somewhat easily write your own commands. An example
# may help. The following example will serve "Hello, $x!" whenever
# a client sends a request with the URI /say_hello_to/$x:
#
# serve_hello() {
# add_response_header "Content-Type" "text/plain"
# send_response_ok_exit <<< "Hello, $2!"
# }
# on_uri_match '^/say_hello_to/(.*)$' serve_hello
#
# Like mentioned before, the contents of ${BASH_REMATCH[@]} are passed
# to your command, so its possible to use regular expression groups
# to pull out info.
#
# With this example, when the requested URI is /say_hello_to/Josh, serve_hello
# is invoked with the arguments '/say_hello_to/Josh' 'Josh',
# (${BASH_REMATCH[0]} is always the full match)
EOF
warn "Created bashttpd.conf using defaults. Please review and configure bashttpd.conf before running bashttpd again."
# exit 1
}
}
function recv() { ((${VERBOSE})) && echo "< $@" >&2; }
function send() { ((${VERBOSE})) && echo "> $@" >&2; echo "$*"; }
function add_response_header() { RESPONSE_HEADERS+=("$1: $2"); }
function send_response_binary() {
local code="$1"
local file="${2}"
local transfer_stats=""
local tmp_stat_file="/tmp/_send_response_$$_"
send "HTTP/1.0 $1 ${HTTP_RESPONSE[$1]}"
for i in "${RESPONSE_HEADERS[@]}"; do
send "$i"
done
send
if ((${VERBOSE})); then
## Use dd since it handles null bytes
dd 2>"${tmp_stat_file}" < "${file}"
transfer_stats=$(<"${tmp_stat_file}")
echo -en ">> Transferred: ${file}\n>> $(awk '/copied/{print}' <<< "${transfer_stats}")\n" >&2
rm "${tmp_stat_file}"
else
## Use dd since it handles null bytes
dd 2>"${DUMP_DEV}" < "${file}"
fi
}
function send_response() {
local code="$1"
send "HTTP/1.0 $1 ${HTTP_RESPONSE[$1]}"
for i in "${RESPONSE_HEADERS[@]}"; do
send "$i"
done
send
while IFS= read -r line; do
send "${line}"
done
}
function send_response_ok_exit() { send_response 200; exit 0; }
function send_response_ok_exit_binary() { send_response_binary 200 "${1}"; exit 0; }
function fail_with() { send_response "$1" <<< "$1 ${HTTP_RESPONSE[$1]}"; exit 1; }
function serve_file() {
local file="$1"
local CONTENT_TYPE=""
case "${file}" in
*\.css)
CONTENT_TYPE="text/css"
;;
*\.js)
CONTENT_TYPE="text/javascript"
;;
*)
CONTENT_TYPE=$(file -b --mime-type "${file}")
;;
esac
add_response_header "Content-Type" "${CONTENT_TYPE}"
CONTENT_LENGTH=$(stat -c'%s' "${file}")
add_response_header "Content-Length" "${CONTENT_LENGTH}"
## Use binary safe transfer method since text doesn't break.
send_response_ok_exit_binary "${file}"
}
function serve_dir_with_tree() {
local dir="$1" tree_vers tree_opts basehref x
## HTML 5 compatible way to avoid tree html from generating favicon
## requests in certain browsers, such as browsers in Android smartwatches. =)
local no_favicon=" <link href=\"data:image/x-icon;base64,${FAVICON}\" rel=\"icon\" type=\"image/x-icon\" />"
local tree_page=""
local base_server_path="/${2%/}"
[ "$base_server_path" = "/" ] && base_server_path=".."
local tree_opts="--du -h -a --dirsfirst"
add_response_header "Content-Type" "text/html"
# The --du option was added in 1.6.0. "/${2%/*}"
read _ tree_vers x < <(tree --version)
tree_page=$(tree -H "$base_server_path" -L 1 "${tree_opts}" -D "${dir}")
tree_page=$(sed "5 i ${no_favicon}" <<< "${tree_page}")
[[ "${tree_vers}" == v1.6* ]]
send_response_ok_exit <<< "${tree_page}"
}
function serve_dir_with_ls() {
local dir="$1"
add_response_header "Content-Type" "text/plain"
send_response_ok_exit < \
<(ls -la "${dir}")
}
function serve_dir() {
local dir="$1"
# If `tree` is installed, use that for pretty output.
which tree &>"${DUMP_DEV}" && \
serve_dir_with_tree "$@"
serve_dir_with_ls "$@"
fail_with 500
}
function urldecode() { [ "${1%/}" = "" ] && echo "/" || echo -e "$(sed 's/%\([[:xdigit:]]\{2\}\)/\\\x\1/g' <<< "${1%/}")"; }
function serve_dir_or_file_from() {
local URL_PATH="${1}/${3}"
shift
URL_PATH=$(urldecode "${URL_PATH}")
[[ $URL_PATH == *..* ]] && fail_with 400
# Serve index file if exists in requested directory
[[ -d "${URL_PATH}" && -f "${URL_PATH}/index.html" && -r "${URL_PATH}/index.html" ]] && \
URL_PATH="${URL_PATH}/index.html"
if [[ -f "${URL_PATH}" ]]; then
[[ -r "${URL_PATH}" ]] && \
serve_file "${URL_PATH}" "$@" || fail_with 403
Elif [[ -d "${URL_PATH}" ]]; then
[[ -x "${URL_PATH}" ]] && \
serve_dir "${URL_PATH}" "$@" || fail_with 403
fi
fail_with 404
}
function serve_static_string() {
add_response_header "Content-Type" "text/plain"
send_response_ok_exit <<< "$1"
}
function on_uri_match() {
local regex="$1"
shift
[[ "${REQUEST_URI}" =~ $regex ]] && \
"$@" "${BASH_REMATCH[@]}"
}
function unconditionally() { "$@" "$REQUEST_URI"; }
function main() {
local recv=""
local line=""
local REQUEST_METHOD=""
local REQUEST_HTTP_VERSION=""
chk_conf_file
[[ ${UID} = 0 ]] && warn "It is not recommended to run bashttpd as root."
# Request-Line HTTP RFC 2616 $5.1
read -r line || fail_with 400
line=${line%%$'\r'}
recv "${line}"
read -r REQUEST_METHOD REQUEST_URI REQUEST_HTTP_VERSION <<< "${line}"
[ -n "${REQUEST_METHOD}" ] && [ -n "${REQUEST_URI}" ] && \
[ -n "${REQUEST_HTTP_VERSION}" ] || fail_with 400
# Only GET is supported at this time
[ "${REQUEST_METHOD}" = "GET" ] || fail_with 405
while IFS= read -r line; do
line=${line%%$'\r'}
recv "${line}"
# If we've reached the end of the headers, break.
[ -z "${line}" ] && break
REQUEST_HEADERS+=("${line}")
done
}
if [[ ! -z "{$1}" ]] && [ "${1}" = "-s" ]; then
socat TCP4-LISTEN:${LISTEN_PORT},fork EXEC:"${0}"
else
main
source "${BASHTTPD_CONF}"
fail_with 500
fi
mkfifo pipe;
while true ;
do
#use read line from pipe to make it blocks before request comes in,
#this is the key.
{ read line<pipe;echo -e "HTTP/1.1 200 OK\r\n";echo $(date);
} | nc -l -q 0 -p 8080 > pipe;
done
LOL, un hack super boiteux, mais au moins curl et firefox l’accepte:
while true ; do (dd if=/dev/zero count=10000;echo -e "HTTP/1.1\n\n $(date)") | nc -l 1500 ; done
Tu ferais mieux de le remplacer bientôt par quelque chose de bien!
Ah oui, mon nc n'était pas exactement le même que le vôtre, il n'aimait pas l'option -p.
Tapez nc -h et voyez si vous avez l'option - e disponible. Si oui, vous pouvez créer un script, par exemple:
script.sh
echo -e "HTTP/1.1 200 OK\n\n $(date)"
et lancez ça comme ça:
while true ; do nc -l -p 1500 -e script.sh; done
Notez que l'option -e doit être activée à la compilation pour être disponible.
Si vous utilisez Alpine Linux, le netcat BusyBox est légèrement différent:
while true; do nc -l -p 8080 -e sh -c 'echo -e "HTTP/1.1 200 OK\n\n$(date)"'; done
Je pense que le problème selon lequel toutes les solutions répertoriées ne fonctionnent pas, est intrinsèque à la nature du service http, chaque requête établie est adressée à un client différent et la réponse doit être traitée dans un contexte différent, chaque requête doit créer une nouvelle exemple de réponse ...
Je pense que la solution actuelle est le -e de netcat mais je ne sais pas pourquoi ne fonctionne pas… c'est peut-être ma version nc que j'ai testée sur openwrt ...
avec socat ça marche ....
J'essaie ceci https://github.com/avleen/bashttpd
et cela fonctionne, mais je dois exécuter le script Shell avec cette commande.
socat tcp-l:80,reuseaddr,fork EXEC:bashttpd &
Les échantillons socat et netcat sur github ne fonctionnent pas pour moi, mais les socat que j'ai utilisés fonctionnent.