web-dev-qa-db-fra.com

Impossible d'installer burg: erreur lors de l'installation

J'ai essayé d'installer burg et j'ai eu une erreur.

J'ai utilisé les commandes suivantes:

Sudo add-apt-repository ppa:n-muench/burg
Sudo apt-get update && Sudo apt-get install
Sudo apt-get install burg burg-common burg-emu burg-pc burg-themes burg-themes-common

Jusqu'à présent, tout s'est bien passé, mais après la commande suivante, j'ai l'erreur:

aneal@ubuntu:~$ Sudo burg-install /dev/sda3 && Sudo update-burg
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
/usr/sbin/burg-setup: warn: Attempting to install GRUB to a partition instead of the MBR.  This is a BAD idea..
/usr/sbin/burg-setup: warn: Embedding is not possible.  GRUB can only be installed in this setup by using blocklists.  However, blocklists are UNRELIABLE and their use is discouraged..
/usr/sbin/burg-setup: error: if you really want blocklists, use --force.

i suppose sda3 is the relative drive to install brug in MBR

Maintenant, je pense que je ne peux pas redémarrer. Je suppose que si je démarre, j'obtiendrai grub rescue, et je sais comment m'en remettre, mon problème est de savoir comment installer burg dans le MBR maintenant.

ÉDITER:

aneal@ubuntu:~$ Sudo burg-install /dev/sda && Sudo update-burg
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
Installation finished. No error reported.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
Generating burg.cfg ...
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
burg-probe: error: /Host/ubuntu/disks/root.disk is not a block device.
Found linux image: /boot/vmlinuz-2.6.38-8-generic
Found initrd image: /boot/initrd.img-2.6.38-8-generic
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
Found Windows 7 (loader) on /dev/sda2
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
error: cannot seek `/dev/sda'.
done

Et c'est le même résultat avec sda2.

fdisk -l Résultat:

aneal@ubuntu:~$ Sudo fdisk -l

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x97646c29

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        1531    12290016+  42  SFS
/dev/sda2   *        1531        1543      102400   42  SFS
/dev/sda3            1543       14070   100618240   42  SFS
/dev/sda4           14070       38914   199559512   42  SFS

Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes
49 heads, 48 sectors/track, 3292 cylinders
Units = cylinders of 2352 * 512 = 1204224 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1   *           4        3293     3868160    b  W95 FAT32
burgmbrgrub2
2
nebula

La commande pour installer Burg doit être Sudo burg-install /dev/sda && Sudo update-burg

Vous devriez envisager d'installer Burg Manager - les détails sur l'installation peuvent être trouvés ici - c'est une interface graphique pour aider à la configuration et à l'installation de Burg.

1
Mark Rooney