Comment modifier la configuration de PulseAudio via un script?
J'ai connecté la télévision à mon PC via le port HDMI. Chaque fois que j'allume mon ordinateur, je dois passer de (HDMI) à pavucontrol (dans l'onglet de configuration) à (HDMI 3). Je souhaite faire un script bash qui peut le changer pour moi.
Voici à quoi ça ressemble dans pavucontrol:
Sortie de pacmd list_sinks commande avant et après changement de pavucontrol:
pacmd list_sinks avant de changer:
3 sink(s) available.
index: 0
name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9049
volume: front-left: 65886 / 101% / 0,14 dB, front-right: 65886 / 101% / 0,14 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 45,38 ms
max request: 6 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:01:00.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:01:00.0-usb-0:10:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/sound/card2"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0012"
device.product.name = "USB Audio Device"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "front:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogowe stereo"
device.description = "USB Audio Device Analogowe stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0012"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output-speaker: Głośniki (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
* index: 2
name: <alsa_output.pci-0000_0a_00.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9059
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 31,46 ms
max request: 6 KiB
max rewind: 64 KiB
monitor source: 3
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 371,52 ms
card: 2 <alsa_card.pci-0000_0a_00.3>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Analog"
alsa.id = "ALC887-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd700000 irq 58"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0a:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogowe stereo"
device.description = "HD-Audio Generic Analogowe stereo"
alsa.mixer_name = "Realtek ALC887-VD"
alsa.components = "HDA:10ec0887,1458a182,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Wyjście liniowe (priority 9900, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Słuchawki (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-lineout>
index: 7
name: <alsa_output.pci-0000_08_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9050
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 39,91 ms
max request: 6 KiB
max rewind: 64 KiB
monitor source: 8
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 371,52 ms
card: 1 <alsa_card.pci-0000_08_00.1>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfd080000 irq 56"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:08:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fb9"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "HDA NVidia Digital Stereo (HDMI)"
alsa.mixer_name = "Nvidia GPU 80 HDMI/DP"
alsa.components = "HDA:10de0080,104385c7,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "E2240
"
active port: <hdmi-output-0>
pacmd list_sinks après modification:
3 sink(s) available.
index: 0
name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9049
volume: front-left: 65886 / 101% / 0,14 dB, front-right: 65886 / 101% / 0,14 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 45,35 ms
max request: 6 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:01:00.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:01:00.0-usb-0:10:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/sound/card2"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0012"
device.product.name = "USB Audio Device"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "front:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogowe stereo"
device.description = "USB Audio Device Analogowe stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0012"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output-speaker: Głośniki (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
* index: 2
name: <alsa_output.pci-0000_0a_00.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9059
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 38,88 ms
max request: 6 KiB
max rewind: 64 KiB
monitor source: 3
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 371,52 ms
card: 2 <alsa_card.pci-0000_0a_00.3>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Analog"
alsa.id = "ALC887-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd700000 irq 58"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0a:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogowe stereo"
device.description = "HD-Audio Generic Analogowe stereo"
alsa.mixer_name = "Realtek ALC887-VD"
alsa.components = "HDA:10ec0887,1458a182,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Wyjście liniowe (priority 9900, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Słuchawki (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-lineout>
index: 6
name: <alsa_output.pci-0000_08_00.1.hdmi-stereo-extra2>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9050
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 30,36 ms
max request: 6 KiB
max rewind: 64 KiB
monitor source: 7
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 371,52 ms
card: 1 <alsa_card.pci-0000_08_00.1>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 2"
alsa.id = "HDMI 2"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "8"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfd080000 irq 56"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:08:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fb9"
device.string = "hdmi:0,2"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra2"
device.profile.description = "Digital Stereo (HDMI 3)"
device.description = "HDA NVidia Digital Stereo (HDMI 3)"
alsa.mixer_name = "Nvidia GPU 80 HDMI/DP"
alsa.components = "HDA:10de0080,104385c7,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "LG TV
"
active port: <hdmi-output-2>
pactl list cards sortie:
0. karta
Nazwa: alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00
Sterownik: module-alsa-card.c
Właściciel modułu: 6
Właściwości:
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:01:00.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:01:00.0-usb-0:10:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/sound/card2"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0012"
device.product.name = "USB Audio Device"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "2"
device.description = "USB Audio Device"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profile:
input:analog-mono: Wejście Analogowe mono (odpływy: 0, źródła: 1, priorytet: 2, dostępne: tak)
output:analog-stereo: Wyjście Analogowe stereo (odpływy: 1, źródła: 0, priorytet: 6000, dostępne: tak)
output:analog-stereo+input:analog-mono: Wyjście Analogowe stereo + Wejście Analogowe mono (odpływy: 1, źródła: 1, priorytet: 6002, dostępne: tak)
output:iec958-stereo: Wyjście Cyfrowe stereo (IEC958) (odpływy: 1, źródła: 0, priorytet: 5500, dostępne: tak)
output:iec958-stereo+input:analog-mono: Wyjście Cyfrowe stereo (IEC958) + Wejście Analogowe mono (odpływy: 1, źródła: 1, priorytet: 5502, dostępne: tak)
off: Wyłączone (odpływy: 0, źródła: 0, priorytet: 0, dostępne: tak)
Aktywny profil: output:analog-stereo+input:analog-mono
Porty:
analog-input-mic: Mikrofon (priority: 8700, latency offset: 0 usec)
Właściwości:
device.icon_name = "audio-input-microphone"
Część profilu: input:analog-mono, output:analog-stereo+input:analog-mono, output:iec958-stereo+input:analog-mono
analog-output-speaker: Głośniki (priority: 10000, latency offset: 0 usec)
Właściwości:
device.icon_name = "audio-speakers"
Część profilu: output:analog-stereo, output:analog-stereo+input:analog-mono
iec958-stereo-output: Wyjście cyfrowe (S/PDIF) (priority: 0, latency offset: 0 usec)
Część profilu: output:iec958-stereo, output:iec958-stereo+input:analog-mono
1. karta
Nazwa: alsa_card.pci-0000_08_00.1
Sterownik: module-alsa-card.c
Właściciel modułu: 7
Właściwości:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xfd080000 irq 56"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:08:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fb9"
device.string = "0"
device.description = "HDA NVidia"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profile:
output:hdmi-stereo: Wyjście Digital Stereo (HDMI) (odpływy: 1, źródła: 0, priorytet: 5400, dostępne: tak)
output:hdmi-stereo-extra1: Wyjście Digital Stereo (HDMI 2) (odpływy: 1, źródła: 0, priorytet: 5200, dostępne: tak)
output:hdmi-surround-extra1: Wyjście Digital Surround 5.1 (HDMI 2) (odpływy: 1, źródła: 0, priorytet: 100, dostępne: tak)
output:hdmi-surround71-extra1: Wyjście Digital Surround 7.1 (HDMI 2) (odpływy: 1, źródła: 0, priorytet: 100, dostępne: tak)
output:hdmi-stereo-extra2: Wyjście Digital Stereo (HDMI 3) (odpływy: 1, źródła: 0, priorytet: 5200, dostępne: tak)
output:hdmi-surround-extra2: Wyjście Digital Surround 5.1 (HDMI 3) (odpływy: 1, źródła: 0, priorytet: 100, dostępne: tak)
off: Wyłączone (odpływy: 0, źródła: 0, priorytet: 0, dostępne: tak)
Aktywny profil: output:hdmi-stereo
Porty:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available)
Właściwości:
device.icon_name = "video-display"
device.product.name = "E2240
"
Część profilu: output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, not available)
Właściwości:
device.icon_name = "video-display"
Część profilu: output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, available)
Właściwości:
device.icon_name = "video-display"
device.product.name = "LG TV
"
Część profilu: output:hdmi-stereo-extra2, output:hdmi-surround-extra2
2. karta
Nazwa: alsa_card.pci-0000_0a_00.3
Sterownik: module-alsa-card.c
Właściciel modułu: 8
Właściwości:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd700000 irq 58"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0a:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.string = "1"
device.description = "HD-Audio Generic"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profile:
input:analog-stereo: Wejście Analogowe stereo (odpływy: 0, źródła: 1, priorytet: 60, dostępne: tak)
output:analog-stereo: Wyjście Analogowe stereo (odpływy: 1, źródła: 0, priorytet: 6000, dostępne: tak)
output:analog-stereo+input:analog-stereo: Analogowy dupleks stereo (odpływy: 1, źródła: 1, priorytet: 6060, dostępne: tak)
output:iec958-stereo: Wyjście Cyfrowe stereo (IEC958) (odpływy: 1, źródła: 0, priorytet: 5500, dostępne: tak)
output:iec958-stereo+input:analog-stereo: Wyjście Cyfrowe stereo (IEC958) + Wejście Analogowe stereo (odpływy: 1, źródła: 1, priorytet: 5560, dostępne: tak)
off: Wyłączone (odpływy: 0, źródła: 0, priorytet: 0, dostępne: tak)
Aktywny profil: output:analog-stereo
Porty:
analog-input-front-mic: Przedni mikrofon (priority: 8500, latency offset: 0 usec, not available)
Właściwości:
device.icon_name = "audio-input-microphone"
Część profilu: input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-rear-mic: Tylny mikrofon (priority: 8200, latency offset: 0 usec, not available)
Właściwości:
device.icon_name = "audio-input-microphone"
Część profilu: input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-linein: Wejście liniowe (priority: 8100, latency offset: 0 usec, not available)
Część profilu: input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-output-lineout: Wyjście liniowe (priority: 9900, latency offset: 0 usec, available)
Część profilu: output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Słuchawki (priority: 9000, latency offset: 0 usec, not available)
Właściwości:
device.icon_name = "audio-headphones"
Część profilu: output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Wyjście cyfrowe (S/PDIF) (priority: 0, latency offset: 0 usec)
Część profilu: output:iec958-stereo, output:iec958-stereo+input:analog-stereo
Comment puis-je y arriver?
Chaque fois que vous redémarrez, Pulse Audio réinitialise le périphérique audio sur HDMI. Pour conserver le réglage sur HDMI3, vous devez lui dire d'arrêter automatiquement la commutation.
Désactiver la commutation automatique des appareils
Lorsque le signal est perdu pendant le sommeil ou l'arrêt, Pulse Audio est automatiquement configuré pour activer la source par défaut (votre HDMI). Lors de la reprise ou du redémarrage, le périphérique audio est toujours sur HDMI. Pour remplacer ce paramètre, indiquez à Pulse Audio de ne jamais changer automatiquement de périphérique audio:
- éditer le fichier
/etc/Pulse/default.pa - trouver la ligne
load-module module-switch-on-port-available - insérez un
#au début de la ligne pour désactiver le basculement automatique de port - sauvegardez le fichier et redémarrez.
Au lieu de redémarrer, vous pouvez utiliser pulseaudio -k pour recharger les modifications de configuration.