web-dev-qa-db-fra.com

Pas de Wifi dans Qualcomm Atheros - Ubuntu 16.04 - Acer Aspire E 15

Après l'installation d'Ubuntu 16.04 dans un ordinateur portable Acer avec Qualcom Atheros, cela ne fonctionne pas. J'ai essayé ,

Sudo rfkill list all
0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
1: Acer-wireless: Wireless LAN
    Soft blocked: no
    Hard blocked: no

Ensuite, vérifié

uname -r
4.4.0-21-generic

et, comme suggéré, j'ai essayé,

lspci -nnk | grep -iA2 net; dmesg | grep ath10k
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
    Subsystem: Acer Incorporated [ALi] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1025:0987]
    Kernel driver in use: r8169
    Kernel modules: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0042] (rev 30)
    Subsystem: Foxconn International, Inc. Device [105b:e09a]
    Kernel driver in use: ath10k_pci
[    7.100283] ath10k_pci 0000:03:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
[    7.390307] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[    7.390332] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-5.bin failed with error -2
[    7.390336] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-5.bin': -2
[    7.390350] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-4.bin failed with error -2
[    7.390353] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-4.bin': -2
[    7.390365] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-3.bin failed with error -2
[    7.390369] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-3.bin': -2
[    7.390381] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-2.bin failed with error -2
[    7.390384] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-2.bin': -2
[    7.390396] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware.bin failed with error -2
[    7.390398] ath10k_pci 0000:03:00.0: could not fetch firmware (-2)
[    7.390401] ath10k_pci 0000:03:00.0: could not fetch firmware files (-2)
[    7.390404] ath10k_pci 0000:03:00.0: could not probe fw (-2)

Maintenant que dois-je faire?

driverswirelessatheros
10
Mahabub Islam Prio

Votre pilote nécessite un firmware manquant:

Le chargement direct du micrologiciel pour ath10k/QCA9377/hw1.0/firmware-5.bin a échoué avec l'erreur -2

Avec une connexion Internet active via Ethernet, en mode connecté ou par tout autre moyen possible, veuillez ouvrir un terminal et procédez comme suit:

Sudo apt-get update
Sudo apt-get install git
git clone https://github.com/kvalo/ath10k-firmware.git
Sudo mkdir /lib/firmware/ath10k/QCA9377
Sudo mkdir /lib/firmware/ath10k/QCA9377/hw1.0
cd ath10k-firmware/QCA9377/hw1.0
Sudo cp *  /lib/firmware/ath10k/QCA9377/hw1.0
cd /lib/firmware/ath10k/QCA9377/hw1.0
Sudo mv firmware-5.bin_WLAN.TF.1.0-00267-1  firmware-5.bin

Redémarrez et votre réseau sans fil devrait fonctionner.

15
chili555