web-dev-qa-db-fra.com

Comment installer le signal pour pouvoir installer Octave?

n'importe qui peut m'aider avec cette erreur?

octave:4> pkg install signal-1.2.0.tar.gz
error: the following dependencies where unsatisfied:
   signal needs optim >= 1.0.0
 signal needs specfun >= 0.0.0
 signal needs control >= 2.2.3
 signal needs general >= 1.3.2
octave:4> pkg install optim-1.2.2.tar.gz
error: the following dependencies where unsatisfied:
   optim needs miscellaneous >= 1.0.10
 optim needs struct >= 1.0.10
octave:4> pkg install struct-1.0.10.tar.gz
make: /usr/bin/mkoctfile: Command not found
make: *** [fields2cell.oct] Error 127
'make' returned the following error: make: Entering directory `/tmp/oct-fDBs5k/struct-1.0.10/src'
/usr/bin/mkoctfile -s fields2cell.cc
make: Leaving directory `/tmp/oct-fDBs5k/struct-1.0.10/src'
error: called from `pkg>configure_make' in file /usr/share/octave/3.6.2/m/pkg/pkg.m near line 1391, column 9
error: called from:
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 834, column 5
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 383, column 9

Je dois installer le package de signal, mais je dois en télécharger un autre sur lequel je travaille mais il reste bloqué lors de l'installation de struct package.

@edit Même erreur lors de la tentative d'installation du paquet misc ~.

octave:5> pkg install miscellaneous-1.2.0.tar.gz
error: the following dependencies where unsatisfied:
   miscellaneous needs general >= 1.3.1
octave:5> pkg install general-1.3.2.tar.gz
make: /usr/bin/mkoctfile: Command not found
make: *** [__exit__.oct] Error 127
'make' returned the following error: make: Entering directory `/tmp/oct-CA6o4U/general/src'
/usr/bin/mkoctfile __exit__.cc
make: Leaving directory `/tmp/oct-CA6o4U/general/src'
error: called from `pkg>configure_make' in file /usr/share/octave/3.6.2/m/pkg/pkg.m near line 1391, column 9
error: called from:
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 834, column 5
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 383, column 9

@edit informations supplémentaires:

octave:6> which mkoctfile
`mkoctfile' is a function from the file /usr/share/octave/3.6.2/m/miscellaneous/mkoctfile.m

Je ne sais pas quoi faire ..

installationpackage-managementoctave
3
kirekk

Vous pouvez installer signal en entrant la commande suivante dans le terminal:

Sudo apt-get install octave-signal

Ceci installera signal-1.1.3, au moins dans Ubuntu Quantal. Si vous avez réellement besoin de signal-1.2.0, les commandes suivantes vous aideront.

  1. Installez les dépendances à partir des archives Ubuntu:

    Sudo apt-get install liboctave-dev octave-optim octave-specfun octave-control

  2. Téléchargez la dernière version d'octave generalpackage (> = 1.3.2) et installez-la:

    Sudo octave --eval 'pkg install general-1.3.2.tar.gz'

  3. Enfin, installez le package signal-1.2.0:

    Sudo octave --eval 'pkg install signal-1.2.0.tar.gz'
2
bender