web-dev-qa-db-fra.com

Comment puis-je obtenir que mon adaptateur Ethernet USB-C fonctionne sur Ubuntu 17.10?

Je ne sais pas du tout comment commencer (je ne suis pas un expert de Linux), mais les recherches que j'ai effectuées ont permis aux personnes de signaler ce problème en affichant leur résultat syslog. Voici le mien:

[   37.776184] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[   37.921014] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
[   37.921020] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   37.921024] usb 1-3: Product: USB2.0 Hub
[   37.921027] usb 1-3: Manufacturer: GenesysLogic
[   37.922385] hub 1-3:1.0: USB hub found
[   37.924065] hub 1-3:1.0: 4 ports detected
[   38.036247] usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
[   38.059830] usb 2-3: New USB device found, idVendor=05e3, idProduct=0612
[   38.059835] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   38.059839] usb 2-3: Product: USB3.0 Hub
[   38.059842] usb 2-3: Manufacturer: GenesysLogic
[   38.062473] hub 2-3:1.0: USB hub found
[   38.062827] hub 2-3:1.0: 4 ports detected
[   38.904259] usb 2-3.1: new SuperSpeed USB device number 5 using xhci_hcd
[   38.925001] usb 2-3.1: New USB device found, idVendor=0bda, idProduct=8153
[   38.925007] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   38.925011] usb 2-3.1: Product: USB 10/100/1000 LAN
[   38.925014] usb 2-3.1: Manufacturer: Realtek
[   38.925017] usb 2-3.1: SerialNumber: 000001000000
[   39.777550] usb 1-3-port2: Cannot enable. Maybe the USB cable is bad?
libinput error: libinput bug: timer: offset negative (-30854)
[   43.996238] usb 2-3.1: Disable of device-initiated U1 failed.
[   44.000181] usb 2-3.1: Disable of device-initiated U2 failed.
checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1"
bus: 2, device: 5 was not an MTP device
Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service'

S'il vous plaît, que dois-je faire ensuite?

Comme demandé par @ chili555, voici la commande de sortie lsusb:

Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. 
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2a Intel Corp. 
Bus 001 Device 003: ID 0bda:58e6 Realtek Semiconductor Corp. 
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Sortie pour lsmod:

r8152                  57344  0
mii                    16384  2 usbnet,r8152

Sortie pour dmesg:

[    8.163559] r8152 2-3.1:2.0: Unknown version 0x0000
[    8.170641] usbcore: registered new interface driver r8152

De plus, l'interface Ethernet ne montre pas:

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<Host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 3086  bytes 303137 (303.1 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3086  bytes 303137 (303.1 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.26  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fda0:8d16:89c3:fc00:e49a:863b:d6e2:86ae  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::b2bf:16eb:35f3:40ee  prefixlen 64  scopeid 0x20<link>
        inet6 fda0:8d16:89c3:fc00:11f4:4de3:5c3e:ef9d  prefixlen 64  scopeid 0x0<global>
        ether 90:61:ae:6c:53:ae  txqueuelen 1000  (Ethernet)
        RX packets 89776  bytes 82124598 (82.1 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 40081  bytes 5131880 (5.1 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

@shadowbq Voici la sortie pour

modinfo /lib/modules/4.*-generic/kernel/drivers/net/usb/r8152.ko |grep version

:

version:        v1.09.9
srcversion:     EFE9F0107512003CA9626F7
version:        v1.09.9
srcversion:     EFE9F0107512003CA9626F7
2
Marco Dufal

Dans une session de discussion en ligne, nous avons essayé un certain nombre de choses, mais nous avons finalement découvert que l'installation d'une version 4.15 du noyau principal à partir d'ici résout le problème suivant: http://kernel.ubuntu.com/~kernel-ppa/mainline/ v4.15 /

2
chili555