Faire face à certains problèmes concernant le démarrage et l'arrêt de Tomcat sur Ubuntu 10.04
Je rencontre des problèmes concernant le démarrage et l'arrêt de Tomcat.
J'utilise
- Tomcat v.6.0.32 (en utilisant le paquet téléchargé depuis le site Web Apache et non celui distribué par Ubuntu 10.04)
- Ubuntu v.10.04
Je démarre la commande Tomcat en utilisant:
$./catalina.sh jpda start
Ensuite, j'essaye de l'arrêter en utilisant la commande:
$./catalina.sh stop
et obtenez le message suivant:
SEVERE: Catalina.stop:
Java.net.ConnectException: Connection refused
at Java.net.PlainSocketImpl.socketConnect(Native Method)
at Java.net.PlainSocketImpl.doConnect(PlainSocketImpl.Java:351)
at Java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.Java:213)
at Java.net.PlainSocketImpl.connect(PlainSocketImpl.Java:200)
at Java.net.SocksSocketImpl.connect(SocksSocketImpl.Java:366)
at Java.net.Socket.connect(Socket.Java:529)
at Java.net.Socket.connect(Socket.Java:478)
at Java.net.Socket.<init>(Socket.Java:375)
at Java.net.Socket.<init>(Socket.Java:189)
at org.Apache.catalina.startup.Catalina.stopServer(Catalina.Java:422)
at Sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at Sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.Java:39)
at Sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.Java:25)
at Java.lang.reflect.Method.invoke(Method.Java:597)
at org.Apache.catalina.startup.Bootstrap.stopServer(Bootstrap.Java:338)
at org.Apache.catalina.startup.Bootstrap.main(Bootstrap.Java:416)
J'ai également essayé de l'arrêter en utilisant la commande:
$./catalina.sh stop -force
mais j'ai reçu le message:
Kill failed: $CATALINA_PID not set
Ensuite, j'ai à nouveau essayé de démarrer Tomcat à l'aide de la commande:
$./catalina.sh jpda start
Dans le dossier/logs, seul catalina.out est généré avec le message d'erreur suivant:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Comme il est indiqué dans l'erreur "Adresse déjà utilisée", j'ai vérifié qu'aucune autre application n'est configurée pour s'exécuter sur le port 8080. Chaque fois que je tue l'ID de processus et le redémarre, le démarrage fonctionne correctement.Cela m'oblige à tuer le processus manuellement à l'aide de la commande "KILL", lorsque je dois arrêter le serveur Tomcat. Ce même comportement que je rencontre sur d'autres machines aussi où le même environnement que mentionné ci-dessus est configuré.
Quelqu'un peut-il me faire savoir ce qui est à l'origine de ce problème et comment le résoudre?
Merci,
Jignesh
Correction du problème d'arrêt de Tomcat.Publier la solution ici pour référence.
Procédez comme suit pour le réparer sur votre machine:
1) Replace $CATALINA_HOME/bin/catalina.sh with catalina.sh shown below.
2) Open /etc/bash.bashrc for edit
3) Add following into it, (AFTER export CATALINA_HOME)
export CATALINA_PID="$CATALINA_HOME/catalina_pid.txt",
where $CATALINA_HOME is the Tomcat home path
4) Execute following :
$ source /etc/bash.bashrc
5) Start Tomcat: $CATALINA_HOME/bin/catalina.sh start (or catalina.sh jpda start)
6) Shutdown Tomcat using following command only for proper shutdown:
$CATALINA_HOME/bin/catalina.sh stop -force
catalina.sh - contient mes commentaires en ligne
#!/bin/sh
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.Apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------------
# Start/Stop Script for the CATALINA Server
#
# Environment Variable Prerequisites
#
# CATALINA_HOME May point at your Catalina "build" directory.
#
# CATALINA_BASE (Optional) Base directory for resolving dynamic portions
# of a Catalina installation. If not present, resolves to
# the same directory that CATALINA_HOME points to.
#
# CATALINA_OUT (Optional) Full path to a file where stdout and stderr
# will be redirected.
# Default is $CATALINA_BASE/logs/catalina.out
#
# CATALINA_OPTS (Optional) Java runtime options used when the "start",
# or "run" command is executed.
#
# CATALINA_TMPDIR (Optional) Directory path location of temporary directory
# the JVM should use (Java.io.tmpdir). Defaults to
# $CATALINA_BASE/temp.
#
# Java_HOME Must point at your Java Development Kit installation.
# Required to run the with the "debug" argument.
#
# JRE_HOME Must point at your Java Development Kit installation.
# Defaults to Java_HOME if empty.
#
# Java_OPTS (Optional) Java runtime options used when the "start",
# "stop", or "run" command is executed.
#
# Java_ENDORSED_DIRS (Optional) Lists of of colon separated directories
# containing some jars in order to allow replacement of APIs
# created outside of the JCP (i.e. DOM and SAX from W3C).
# It can also be used to update the XML parser implementation.
# Defaults to $CATALINA_HOME/endorsed.
#
# JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start"
# command is executed. The default is "dt_socket".
#
# JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start"
# command is executed. The default is 8000.
#
# JPDA_SUSPEND (Optional) Java runtime options used when the "jpda start"
# command is executed. Specifies whether JVM should suspend
# execution immediately after startup. Default is "n".
#
# JPDA_OPTS (Optional) Java runtime options used when the "jpda start"
# command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
# and JPDA_SUSPEND are ignored. Thus, all required jpda
# options MUST be specified. The default is:
#
# -agentlib:jdwp=transport=$JPDA_TRANSPORT,
# address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND
#
# CATALINA_PID (Optional) Path of the file which should contains the pid
# of catalina startup Java process, when start (fork) is used
#
# LOGGING_CONFIG (Optional) Override Tomcat's logging config file
# Example (all one line)
# LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
#
# LOGGING_MANAGER (Optional) Override Tomcat's logging manager
# Example (all one line)
# LOGGING_MANAGER="-Djava.util.logging.manager=org.Apache.juli.ClassLoaderLogManager"
#
# $Id: catalina.sh 1040547 2010-11-30 14:47:49Z markt $
# -----------------------------------------------------------------------------
# OS specific support. $var _must_ be set to either true or false.
cygwin=false
os400=false
darwin=false
case "`uname`" in
CYGWIN*) cygwin=true;;
OS400*) os400=true;;
Darwin*) darwin=true;;
esac
# resolve links - $0 may be a softlink
PRG="$0"
while [ -h "$PRG" ]; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> \(.*\)$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
# Get standard environment variables
PRGDIR=`dirname "$PRG"`
# Only set CATALINA_HOME if not already set
[ -z "$CATALINA_HOME" ] && CATALINA_HOME=`cd "$PRGDIR/.." >/dev/null; pwd`
# Ensure that any user defined CLASSPATH variables are not used on startup,
# but allow them to be specified in setenv.sh, in rare case when it is needed.
CLASSPATH=
if [ -r "$CATALINA_BASE"/bin/setenv.sh ]; then
. "$CATALINA_BASE"/bin/setenv.sh
Elif [ -r "$CATALINA_HOME"/bin/setenv.sh ]; then
. "$CATALINA_HOME"/bin/setenv.sh
fi
# For Cygwin, ensure paths are in UNIX format before anything is touched
if $cygwin; then
[ -n "$Java_HOME" ] && Java_HOME=`cygpath --unix "$Java_HOME"`
[ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"`
[ -n "$CATALINA_HOME" ] && CATALINA_HOME=`cygpath --unix "$CATALINA_HOME"`
[ -n "$CATALINA_BASE" ] && CATALINA_BASE=`cygpath --unix "$CATALINA_BASE"`
[ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
fi
# For OS400
if $os400; then
# Set job priority to standard for interactive (interactive - 6) by using
# the interactive priority - 6, the helper threads that respond to requests
# will be running at the same priority as interactive jobs.
COMMAND='chgjob job('$JOBNAME') runpty(6)'
system $COMMAND
# Enable multi threading
export QIBM_MULTI_THREADED=Y
fi
# Get standard Java environment variables
if $os400; then
# -r will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
if [ -r "$CATALINA_HOME"/bin/setclasspath.sh ]; then
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
echo "Cannot find $CATALINA_HOME/bin/setclasspath.sh"
echo "This file is needed to run this program"
exit 1
fi
fi
if [ -z "$CATALINA_BASE" ] ; then
CATALINA_BASE="$CATALINA_HOME"
fi
# Add Tomcat-juli.jar and bootstrap.jar to classpath
# Tomcat-juli.jar can be over-ridden per instance
if [ ! -z "$CLASSPATH" ] ; then
CLASSPATH="$CLASSPATH":
fi
if [ "$CATALINA_BASE" != "$CATALINA_HOME" ] && [ -r "$CATALINA_BASE/bin/Tomcat-juli.jar" ] ; then
CLASSPATH="$CLASSPATH""$CATALINA_BASE"/bin/Tomcat-juli.jar:"$CATALINA_HOME"/bin/bootstrap.jar
else
CLASSPATH="$CLASSPATH""$CATALINA_HOME"/bin/bootstrap.jar
fi
if [ -z "$CATALINA_OUT" ] ; then
CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out
fi
if [ -z "$CATALINA_TMPDIR" ] ; then
# Define the Java.io.tmpdir to use for Catalina
CATALINA_TMPDIR="$CATALINA_BASE"/temp
fi
# Bugzilla 37848: When no TTY is available, don't output to console
have_tty=0
if [ "`tty`" != "not a tty" ]; then
have_tty=1
fi
# For Cygwin, switch paths to Windows format before running Java
if $cygwin; then
Java_HOME=`cygpath --absolute --windows "$Java_HOME"`
JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"`
CATALINA_HOME=`cygpath --absolute --windows "$CATALINA_HOME"`
CATALINA_BASE=`cygpath --absolute --windows "$CATALINA_BASE"`
CATALINA_TMPDIR=`cygpath --absolute --windows "$CATALINA_TMPDIR"`
CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
Java_ENDORSED_DIRS=`cygpath --path --windows "$Java_ENDORSED_DIRS"`
fi
# Set juli LogManager config file if it is present and an override has not been issued
if [ -z "$LOGGING_CONFIG" ]; then
if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then
LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
else
# Bugzilla 45585
LOGGING_CONFIG="-Dnop"
fi
fi
if [ -z "$LOGGING_MANAGER" ]; then
Java_OPTS="$Java_OPTS -Djava.util.logging.manager=org.Apache.juli.ClassLoaderLogManager"
else
Java_OPTS="$Java_OPTS $LOGGING_MANAGER"
fi
# ----- Execute The Requested Command -----------------------------------------
# Bugzilla 37848: only output this if we have a TTY
if [ $have_tty -eq 1 ]; then
echo "Using CATALINA_BASE: $CATALINA_BASE"
echo "Using CATALINA_HOME: $CATALINA_HOME"
echo "Using CATALINA_TMPDIR: $CATALINA_TMPDIR"
if [ "$1" = "debug" ] ; then
echo "Using Java_HOME: $Java_HOME"
else
echo "Using JRE_HOME: $JRE_HOME"
fi
echo "Using CLASSPATH: $CLASSPATH"
if [ ! -z "$CATALINA_PID" ]; then
# Added by Jignesh Gohel - Nov 08, 2011.
# There was an issue occuring when shutting down Tomcat using
# command ./catalina.sh stop
# Issue mentioned at : http://stackoverflow.com/questions/7890197/facing-some-issues-regarding-Tomcat-startup-and-shutdown-on-ubuntu-10-04
# Tomcat was shutting down properly but the process started using
# command ./catalina.sh start was not getting killed.
# To resolve this issue following steps taken :-
# 1) Exported an environment variable named CATALINA_PID which
# should point to a file in which the Tomcat process id would be
# written.
# Note: Using the normal command to shutdown Tomcat "./catalina.sh stop"
# following message was logged "Tomcat did not stop in time. PID file
# was not removed".Thus to shutdown the Tomcat using following command
# "./catalina.sh stop -force" which forcefully kills the Tomcat process
# and also removes the file pointed by environment variable
# "$CATALINA_PID".Thus executing a "touch" command when starting up
# Tomcat to automatically create the file.
touch "$CATALINA_PID"
echo "Using CATALINA_PID: $CATALINA_PID"
fi
fi
if [ "$1" = "jpda" ] ; then
if [ -z "$JPDA_TRANSPORT" ]; then
JPDA_TRANSPORT="dt_socket"
fi
if [ -z "$JPDA_ADDRESS" ]; then
JPDA_ADDRESS="8000"
fi
if [ -z "$JPDA_SUSPEND" ]; then
JPDA_SUSPEND="n"
fi
if [ -z "$JPDA_OPTS" ]; then
JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND"
fi
CATALINA_OPTS="$CATALINA_OPTS $JPDA_OPTS"
shift
fi
if [ "$1" = "debug" ] ; then
if $os400; then
echo "Debug command not available on OS400"
exit 1
else
shift
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
exec "$_RUNJDB" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../Java \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJDB" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../Java \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start
fi
fi
Elif [ "$1" = "run" ]; then
shift
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
exec "$_RUNJAVA" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJAVA" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start
fi
Elif [ "$1" = "start" ] ; then
if [ ! -z "$CATALINA_PID" ]; then
if [ -f "$CATALINA_PID" ]; then
if [ -s "$CATALINA_PID" ]; then
echo "Existing PID file found during start."
if [ -r "$CATALINA_PID" ]; then
PID=`cat "$CATALINA_PID"`
ps -p $PID >/dev/null 2>&1
if [ $? -eq 0 ] ; then
echo "Tomcat appears to still be running with PID $PID. Start aborted."
exit 1
else
echo "Removing/clearing stale PID file."
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ -w "$CATALINA_PID" ]; then
cat /dev/null > "$CATALINA_PID"
else
echo "Unable to remove or clear stale PID file. Start aborted."
exit 1
fi
fi
fi
else
echo "Unable to read PID file. Start aborted."
exit 1
fi
else
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ ! -w "$CATALINA_PID" ]; then
echo "Unable to remove or write to empty PID file. Start aborted."
exit 1
fi
fi
fi
fi
fi
shift
touch "$CATALINA_OUT"
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
"$_RUNJAVA" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
else
"$_RUNJAVA" "$LOGGING_CONFIG" $Java_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
fi
if [ ! -z "$CATALINA_PID" ]; then
echo $! > "$CATALINA_PID"
fi
Elif [ "$1" = "stop" ] ; then
shift
SLEEP=5
if [ ! -z "$1" ]; then
echo $1 | grep "[^0-9]" >/dev/null 2>&1
if [ $? -gt 0 ]; then
SLEEP=$1
shift
fi
fi
FORCE=0
if [ "$1" = "-force" ]; then
shift
FORCE=1
fi
if [ ! -z "$CATALINA_PID" ]; then
if [ -s "$CATALINA_PID" ]; then
if [ -f "$CATALINA_PID" ]; then
kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
if [ $? -gt 0 ]; then
echo "PID file found but no matching process was found. Stop aborted."
exit 1
fi
else
echo "\$CATALINA_PID was set but the specified file does not exist. Is Tomcat running? Stop aborted."
exit 1
fi
else
echo "PID file is empty and has been ignored."
fi
fi
"$_RUNJAVA" $Java_OPTS \
-Djava.endorsed.dirs="$Java_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.Apache.catalina.startup.Bootstrap "$@" stop
if [ ! -z "$CATALINA_PID" ]; then
if [ -f "$CATALINA_PID" ]; then
while [ $SLEEP -ge 0 ]; do
kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
if [ $? -gt 0 ]; then
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ -w "$CATALINA_PID" ]; then
cat /dev/null > "$CATALINA_PID"
else
echo "Tomcat stopped but the PID file could not be removed or cleared."
fi
fi
break
fi
if [ $SLEEP -gt 0 ]; then
sleep 1
fi
if [ $SLEEP -eq 0 ]; then
if [ $FORCE -eq 0 ]; then
echo "Tomcat did not stop in time. PID file was not removed."
fi
fi
SLEEP=`expr $SLEEP - 1 `
done
fi
fi
if [ $FORCE -eq 1 ]; then
if [ -z "$CATALINA_PID" ]; then
echo "Kill failed: \$CATALINA_PID not set"
else
if [ -f "$CATALINA_PID" ]; then
PID=`cat "$CATALINA_PID"`
echo "Killing Tomcat with the PID: $PID"
kill -9 $PID
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
echo "Tomcat was killed but the PID file could not be removed."
fi
fi
fi
fi
Elif [ "$1" = "version" ] ; then
"$_RUNJAVA" \
-classpath "$CATALINA_HOME/lib/catalina.jar" \
org.Apache.catalina.util.ServerInfo
else
echo "Usage: catalina.sh ( commands ... )"
echo "commands:"
if $os400; then
echo " debug Start Catalina in a debugger (not available on OS400)"
echo " debug -security Debug Catalina with a security manager (not available on OS400)"
else
echo " debug Start Catalina in a debugger"
echo " debug -security Debug Catalina with a security manager"
fi
echo " jpda start Start Catalina under JPDA debugger"
echo " run Start Catalina in the current window"
echo " run -security Start in the current window with security manager"
echo " start Start Catalina in a separate window"
echo " start -security Start in a separate window with security manager"
echo " stop Stop Catalina, waiting up to 5 seconds for the process to end"
echo " stop n Stop Catalina, waiting up to n seconds for the process to end"
echo " stop -force Stop Catalina, wait up to 5 seconds and then use kill -KILL if still running"
echo " stop n -force Stop Catalina, wait up to n seconds and then use kill -KILL if still running"
echo " version What version of Tomcat are you running?"
echo "Note: Waiting for the process to end and use of the -force option require that \$CATALINA_PID is defined"
exit 1
fi
Merci,
Jignesh
N'utilisez pas /etc/bash.bashrc mettez juste ceci sur votre catalina.sh
Après:
if [ -r "$CATALINA_BASE"/bin/setenv.sh ]; then
. "$CATALINA_BASE"/bin/setenv.sh
Elif [ -r "$CATALINA_HOME"/bin/setenv.sh ]; then
. "$CATALINA_HOME"/bin/setenv.sh
fi
mettre ceci:
export CATALINA_PID="$CATALINA_HOME/catalina_pid.txt"
Et maintenant, votre Tomcat sera tué lorsque vous utilisez catalina.sh stop -force
Solution; Définissez d'abord le pid de Tomcat CATALINA_PID = "/ id.pid" export CATALINA_PID
puis tuez-le catalina.sh stop -force
source: http://confluence.atlassian.com/pages/viewpage.action?pageId=216959212
sinon, comme vous l'avez mentionné, tuez-le simplement avec la commande kill
ps aux | grep catalina
kill <pid of Tomcat>
si les deux solutions ci-dessus ne correspondent pas à vos besoins, essayez ce qui suit:
$ Sudo service Tomcat6 stop
* Stopping Tomcat servlet engine Tomcat6 [ OK ]
$ Sudo service Tomcat6 start
* Starting Tomcat servlet engine Tomcat6 [ OK ]
$
ou bien sûr de façon plus traditionnelle:
$ Sudo /etc/init.d/Tomcat6 stop
* Stopping Tomcat servlet engine Tomcat6 [ OK ]
$ Sudo /etc/init.d/Tomcat6 start
* Starting Tomcat ser
Dans mon scénario à ce problème, certains threads ne se sont pas terminés avec succès avec un message d'arrêt publié sur Tomcat, ce qui a rendu le processus Tomcat toujours en suspens.
Je commencerais donc par une simple instance de Tomcat ... et je continuerais d'ajouter les "guerres" personnalisées ou les modifications une par une et je m'assurerais d'arrêter Tomcat avec succès pour réduire le problème.
La commande suivante fait l'affaire:
service Tomcat8 stopCeux-ci seraient également utiles:
service Tomcat8 startservice Tomcat8 restartJe pense que la manière officiellement recommandée (selon les commentaires en ligne catalina.sh) est:
- créez un fichier setenv.sh sous $ CATALINA_HOME/bin:
#!/bin/sh
CATALINA_PID = "$ CATALINA_HOME/logs/catalina.pid"; exporter CATALINA_PID
- chmod comme exécutable:
chmod u + x setenv.sh
- créez le fichier pid en:
touchez $ CATALINA_HOME/logs/catalina.pid
- puis démarrez Tomcat comme d'habitude, le fichier pid sera mis à jour automatiquement. Et vous pouvez également arrêter Tomcat par l'option "-force".
Le problème est dû au fait que l'adresse que vous utilisez pour démarrer Tomcat (en mode normal ou de débogage) est déjà prise par un autre processus.
Vous devez vérifier les ports que vous utilisez dans le fichier you conf (par exemple your_Tomcat_HOME_DIR_/conf/server.xml), pour voir s'ils ne sont pas déjà utilisés
Ici, vous pouvez regarder le port utilisé pour
- démarrage de Tomcat: valeur par défaut 8080
- arrêt de Tomcat: valeur par défaut 8005
- utilisation avec le protocole AJP: valeur par défaut 8009
et si vous utilisez Tomcat en mode débogage (via jdpa ou jdwp), assurez-vous d'utiliser un port différent de tous les ports configurés précédents